With the debut of its JAGUAR 960 TERRA TRAC model, CLAAS has become the first manufacturer to launch a forage harvester with a factory-integrated crawler track system. The new concept offers optimal soil protection under all conditions. An intelligent headland protection system prevents damage to the grass cover and enables year-round operation.
CLAAS claim the new JAGUAR 960 TERRA TRAC sets new standards for soil protection. Tests conducted by Kiel University of Applied Sciences have confirmed that even when the crawler track system is used with the narrowest track version (635 mm wide), the resulting contact area of more than 1.3 m2 is over twice that provided by 800-size tyres.
In combination with the tyre pressure adjustment system, which is also available ex-factory for the rear axle, the JAGUAR 960 TERRA TRAC offers optimal soil protection, one of the benefits being that it does not sink into the ground so deeply when operating in difficult, wet field conditions. This makes the going that much easier for the transport vehicles following the harvester. Two other track variants with widths of 735 mm and 890 mm are also available.
The headland protection system of the TERRA TRAC crawler drive system comes into its own in grassland. During a turning manoeuvre, the support rollers in each track unit are pushed down hydraulically, the front drive roller is raised and the contact area is reduced by about a third. This results in the visible avoidance of damage to the grass cover by the shear effect when turning. Measurements by Kiel University of Applied Sciences have shown that the soil pressure with the support rollers lowered is less than that exerted by a wheeled machine.
Equipped with the 635 mm tracks, it remains within an external width of 3.0 metres and is therefore very straightforward to license for use on public roads. With the wide 890 mm tracks, the machine remains within an external width of 3.5 metres. The suspended chassis enables a top speed of up to 40 km/h and provides optimal driving comfort.
The extended wheelbase results in a significantly larger maintenance compartment and excellent accessibility by means of maintenance panels above the crawler tracks. The corncracker, for example, can be removed very easily above the crawler track on the right side.
The JAGUAR 960 TERRA TRAC uses chopping technology from the 900 model series. The all-hydraulic continuously variable front attachment drive enables efficient power transmission at varying speeds. If the chop length changes, the system automatically makes a corresponding adjustment to the front attachment speed. The result is a very even crop flow and consistently good chop quality.
Following adjustment, the shear bar is clamped in place hydraulically and remains in the required position reliably. This makes for consistently high chop quality.
The machine is also equipped with an automatically adjustable drum concave. The drum concave is attached directly to the mounting block and another pivot point and is automatically moved with the shear bar when the latter is adjusted. This means that the distance between the drum concave and the chopper knives remains constant over the entire length of the drum concave, thereby ensuring an even crop flow, regardless of the condition of the knives. Furthermore, this arrangement saves fuel and reduces wear.