Pöttinger has integrated the latest technical developments from its newest tedder models into the trailed 6-rotor HIT 6.80 T with a working width of 7.45 m. As a result, professional technology is now available for smaller farms too. Thanks to its low power requirement, the new tedder can also be used with smaller tractors.
The new trailed HIT 6.80 T can be hitched either to a linkage bar or by using a drawbar. The large tyres ensure smooth transport on the road. The new HIT 6.80 T also features Hydrolift technology to provide high ground clearance at headlands. The transport height is 4 m.
Pöttinger has now implemented the innovative rotor units and booms used on the newest tedders on the smaller HIT models too, to guarantee clean and tidy operation: tidy pick-up, clean forage, tidy distribution pattern and a clean machine. These are the key advantages of the DYNATECH rotor unit. On the HIT 6.80 T, Pöttinger also offers hydraulic fenceline tedding as an option.
The rotor diameter of 1.67 m on the HIT 6.80 T with six curved tine arms ensure optimum tedding quality and perfect ground tracking.
The swept-back shape of the arms ensures that the crop cannot snag and there is no wrapping around the rotor. The unique rotor geometry has several additional advantages: Forage is picked up more easily and is subjected to less of a beating between the tine arms, meaning lower losses due to disintegration. This careful uptake is achieved by the sweeping arms that ‘pull’ the tines. The tines are under less stress, so service life is increased. The proven, closed tine security system is also integrated into these models. The tine carrier arms are precisely positioned on the rotor plates and are bolted to the hub. This ensures even higher strength for the same weight. The spreading angle can be adjusted on each rotor in five steps without extra tools, resulting in the best match to forage conditions. Large gears and bearings on the DYNATECH rotors ensure smooth operation.