Scotts introduces its GT170 windrower conversion kit

Scotts has launched a conversion kit that allows owners of the GRIMME GT 170 trailed harvesters to convert seamlessly to a fully functioning windrower without modifications to the host machine.

Designed in response to local growers where the Grimme GT170 is their preferred choice of harvester, the Scotts GT170 Windrower conversion kit directly replaces the elevator module. As the kit is attached to the harvester through existing elevator fixing points, there is no need to modify the host machine and thus can be returned to its original set up quickly.

Derek Scott, managing director of Scotts Precision Manufacturing says: “Our customer had tried other windrowers but was disappointed with the conveyor design or the performance of the machine in general so asked us if we could think of a way of converting their stock GT170, and this is the result.

It wasn’t at all straightforward but we are really proud of how we have been able to create a conversion kit that is easy to mount, easy to use and easy to remove. This is the second machine we have converted for the same grower, the first was a lot lower spec host GT170 with limited cleaning and although performed well in average conditions fell down when 2019’s extreme harvesting conditions began to bite. This second conversion was installed on a much higher performing harvester with a digger web and double separators, even though the conversion kit has only been used locally, it has attracted a lot of interest, and we’ve had several strong enquiries, which tells us it should be a popular addition to our range.”

Scotts’ conversion kit features a 5.3m long cross conveyor that allows the lifted crop to be moved gently over the two rows next to the machine and deposited into the centre of the next pair of rows. The hydraulically powered conveyor can be positioned to discharge on the left or the right of the windrower. The conveyor has five sections and features self-cleaning and a soft low flighted 790mm wide sheeted PVC web.

The conversion kit integrates into the GRIMME control box, with the tip ends controlled by the original elevator swanneck up/down control switches. A separate left or right diverter valve is operated from an in-cab toggle switch within a 4” PVC control box that is held in place with magnets. Scotts has utilised the main elevator section to control the left and right movement of the conveyor. The conveyor belt drives via the original elevator web drive and the toggle switch mounted on the control box.

A maximum of six 36” rows can be lifted without moving the crop twice, which is beneficial to the user when making an opening for the harvester and the trailer. An additional benefit of the new kit is that the offside wheel can remain in its original position as there is no need to dispense the crop into the valley where the wheel runs.

The kit, which costs £20,000, comes fully assembled with hydraulic hoses and cables for direct connection to the host harvester. Users have the option of fitting it themselves or asking Scotts or one of its dealers to install the kit for them.

As well as the conversion kit and windrowers, Scotts which was established in 1995, also designs and manufacturers a wide range of haulm toppers and the unique Evolution separator, which quickly and effectively removes stones, clod and loose soil from a wide range of vegetables.

Leave a Reply

Your email address will not be published. Required fields are marked *